Wondering how to connect your Cricut to your computer?

Posted by 120705640 on

In order to be able to cut your Make the Cut! designs on your Cricut, there needs to be a connection between your computer and your Cricut. If you don't already have one, you will need to purchase an A/B type USB cable.  These are inexpensive and very easy to find at any store that sells computers and software (I picked mine up at Walmart for about $14).

The two ends of the cable look like this:

To plug the cable into your Cricut, locate the connection port on the back of your Cricut right beside the power connection and plug the square end of the cable into it as shown below.

Next, locate the USB port on your computer (most computers have several, some on the front and some on the back of the computer) and plug the other end of the cable in. The ports are in different places on different computers, but they look like this:

That's all there is to it!  Once your Cricut and your computer are connected, you will be able to send cutting files directly from Make the Cut! to your Cricut.

Share this post

← Older Post Newer Post →

Leave a comment

Please note, comments must be approved before they are published.